BH Bikes 2017 BH Lynx 6 Full Carbon 11 Speed X1 Enduro MTB
Crafted from a single sheet of 100% carbon fiber, offering uniformity to the entire frame. The Lynx 6 was developed with HM (High Module T40, T30 and T24 of Toray) technology in order to offer increased rigidity.
- Split Pivot Suspension
- Floating shock mount
- Concentric dropouts
- Independent Drive and Brake Links
- Full-length internal routing
- Pressfit 92 BB
- 142x12 Rear Axle
- Dropper post with internal routing
- Fox Kashima shock and fork
SPLIT PIVOT TECHNOLOGY
Split Pivot is a floating suspension system developed by BH based on traction, pedaling efficiency, handling, and enhancing the bicycle’s rigidity. This system allows for separate action on three forces produced on the bicycle: pedaling, braking and suspension. The result is maximum pedaling efficiency with consistent and progressive suspension. The advanced rear suspension of the Lynx allows it to have a greater range while being very lightweight.
INTERNAL CABLE GUIDING
The guiding system of cables and derailleurs is completely internal in the Lynx 6. It is also equipped with an internal guide in the adjustable seatpost. It incorporates the standard ISCG 05 integrated chain guide.
DIRECT MOUNT DERAILLEUR. EASY ADJUSTMENT, TOTAL PRECISION
The direct anchoring of the Direct Mount derailleur guarantees simple adjustment and maximum degrees of reliability and precision. Being fully integrated in the frame offers an increased rigidity and an absolute precision while shifting gears. It’s design simplifies its adjustment. The anchoring of the Direct Post Mount rear brake, including detachable screws, eases adjustment and increases braking reliability.
FRAME: Lynx 6 Carbon
COLOR: Black / Blue / Gray
REAR SHOCK: Fox Factory Float 3 Position EVOL lever
FORK: Fox Factory 36 Float FIT w/HSC/LSC; 15mm axle
STEM: Easton HAVEN 35 (60mm/S, M; 70mm L)
HEADSET: FSA No.42 1.125-1.5"
SHIFT LEVERS: SRAM XO trigger
REAR DERAILLEUR: SRAM XO 11
CRANK SET: Race Face Turbine Cinch 32T (170mm/S; 175mm/M, L)
BB SET: Race Face PF92
CASSETTE: SRAM XG 1175 10-42T
CHAIN: KMC XL11
FRONT BRAKE: Shimano XT Trail 203mm rotor
REAR BRAKE: Shimano XT Trail 180mm rotor
WHEELSET: Easton Heist 30, tubeless ready
TIRES: Maxxis DHF 60TPI, 27.5x2.3"(front)/DHR 60TPI, 27.5x2.3" (rear)
RIMS: Easton Heist 30mm; Tubeless ready
HUBS: Easton X5 100x15mm/front; 142x12mm/rear
SPOKES: double butted w/brass nipples
SADDLE: Prologo Nago X10
SEAT CLAMP: BH 34.9 alloy
SEATPOST: Kind Shock LEV Integra (125mm/S, M; 150mm/L) w/SOUTHPAW lever
HANDLEBAR: Easton HAVEN 35 (750mm w/40mm rise)
GRIPS: BH Lock-on